[. . . ] This mini-dock provides the following interfaces: · PS/2-style Mouse Port Used for connecting a mouse with a PS/2-style connector. · AC Adapter Port Used for connecting the AC adapter to supply power to the system. [. . . ] · AC Adapter Port Used for connecting the AC adapter to supply power to the system. · Video Port Used for connecting a video monitor for displaying the contents of the pen tablet screen. · Floppy Disk Drive Port Used for connecting the optional floppy disk drive (FMWFD2). · PS/2-style Keyboard Port Used for connecting a keyboard with a PS/2-style connector. · LAN Port Used for connecting the pen tablet's optional internal LAN module to a LAN hub. Note: The mini-dock is required in order to use the internal LAN module; there is no LAN port on the pen tablet. Re-start your system. Positioning Guide PS/2-style Mouse Port LAN Port Figure 2. Right Side of Mini-Dock Support Platform Support Bail Pen Tablet Parallel Port PS/2-style Keyboard Port USB Port Mini-Dock Base Mini-Dock Figure 4. Installing the System in the Mini-Dock Serial Port Video Port Floppy Disk Drive Port Removing the System from the Mini-Dock 1. Shut down the system by selecting Start> Shut Down> Shut Down. 0 Figure 3. While holding the base of the mini-dock with one hand, grasp the pen tablet at the top and firmly pull it straight up from the base. Restart your system. Fujitsu is a registered trademark of Fujitsu Ltd. [. . . ] Shut down the system by selecting Start> Shut Down> Shut Down. 0 Figure 3. While holding the base of the mini-dock with one hand, grasp the pen tablet at the top and firmly pull it straight up from the base. [. . . ]